Customized High Quality Stainless Steel Forging Furnace Forced Ventilation Gas Conveying Centrifugal Fan

• Customization: Available
• Material: Carbon Steel/Stainless Steel
• Usage: for Manufacture, Factory
• Model NO.: Y9-11
• Flow Direction: Centrifugal
• Pressure: High Pressure
• Certification: ISO, CE
• Selling Units: Single Item
• After-Sales Service Provided: Field Installation, Commissioning and Training
• Blades: Backward Curve Blade
• Blade Materia: High-Quality Carbon Structural Steel
• Place of Origin: Henan China
• Customized Support: Obmodmoem
• Speed: 375~2900r/Min
• Voltage: 380~660V, 3~13.8kv
• Total Pressure: 1285~4835PA
• Cooling Type: Air Cooling/Circulating Water Cooling
• Brand Name: Simo
• Mounting: Free Standing
• Warranty: 1year
• Transport Package: Steel Pallet Waterproof Cloth Package
• Trademark: SIMO BLOWER
• Origin: Henan, China
• HS Code: 4107960701
• Production Capacity: 10, 000 Sets/Year

Product Description

Customized high quality stainless steel forging furnace forced ventilation gas conveying centrifugal fan

 

Product Description

 The 9-11 series fan has a large flow rate and moderate pressure. 

This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. 

The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. 

It is a high-efficiency energy-saving product jointly designed by the national fan industry and organized by the national wind power industry and the Ministry of Machinery Industry.

It has the characteristics of high efficiency, low noise, flat performance curve and wide efficient area.

Industrial boilers of 5 ~ 35 tons/hour can be used, those with similar intake conditions and suitable performance can be used, but the maximum temperature shall not more than 250°C.

Before the induced draft fan, dust removal device with a dust removal efficiency of no less than 85% must be installed to reduce the dust content of the smoke entering the fan.

It can not only reduce the pollution of the smoke on the environment, but also reduce the wear of the smoke on the fan, which is conducive to prolonging the life of the fan. 

 

Application	Temperature	Normal temperature Air
		Hot Air
	Air composition	Clean air
		Dusty air
		Corrosive gas
		Combustible gas
		Powder materials
		Light particle materials
Performance	Impeller diameter	400~1600	mm
	Speed of mainshaft	730~2900	rpm
	Pressure range	1412~4835	Pa
	Flow range	3297~139712	m3/h
Structure	Blade	Backward
	Impeller Support	SWSI (Single Width, Single Inlet), Impeller overhung.
	Drivetrain	Coupling drivetrain	Can assign
	Lubrication	Oil bath lubrication	Can assign
	Bearing cooling	Air cooling or Circulating Water cooling
System configuration	Motor	SIEMENS, ABB, SIMO, LA…	Can assign
	Impeller	Carbon steel
	Impeller cone (Air Inlet)	Carbon steel
	Case	Carbon steel
	Air damper	Carbon steel
	Main shaft	High-strength carbon structural steel
	Bearing	FAG, SKF, ZWZ, C&U…
	Bearing housing	Cast iron
	Drivetrain	Coupling	Can assign
	Foundation bolt
Optional components	System base frame, Protective screening, Silencer, Inlet & Outlet pipeline compensator, Inlet & Outlet flange,  Damper, Electric actuator, Shock isolator, Diaphragm coupling, Fluid coupling, Motor rain cover, Temperature sensor, Vibrating sensor, Soft starter, Inverter, Special Electrical Motor, System monitoring Instrument, Lube system, Overhead lube tank.