High-Quality Dust Industrial Blower Efficient Industry Fan Ventilation, 9-11durable Centrifugal Exhaust Blower

• Customization: Available
• Material: Carbon Steel
• Usage: High-Quality Dust Industrial Blower
• Model NO.: 9-11
• Flow Direction: Centrifugal
• Pressure: Medium Pressure
• Certification: ISO, CE
• Blade Material: High-Quality Carbon Structural Steel
• Customized Support: OEM, ODM, Obm
• Mounting: Free Standing
• Service Provided: Field Installation, Commissioning and Training
• Driving Mode: Coupling/Direct
• Motor: ABB, or as Your Requirement
• Transport Package: Wooden Case Packing or According to out Customers′
• Specification: 100x100x100
• Trademark: Simo Blower
• Origin: Henan China
• HS Code: 4107960701
• Production Capacity: Wooden Case Packing or According to out Customers′

Product Description

XINXIANG SIMO Blower Co.. LTD

XINXIANG SIMO Blower Co.. LTD, formerly known as the state-owned Xinxiang Blower Factory, was founded in 1955, engaged in the production of fans for more than 70years. Listed on the New Third Board in May 2018, with a registered capital of 50 million yuan, it is one of the largest fan manufacturing enterprises in China, and passed the national integration of two management system evalua-tion. ISO9001 quality management system certification, ISO14001 Environmental management system certification, ISO45001Occupational health and safety management system certification, CE certification.

Detail introduction:

1.The 9-11 series fan has a large flow rate and moderate pressure. 

2.This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. 

3.The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. 

4.It is a high-efficiency energy-saving product jointly designed by the national fan industry and organized by the national wind power industry and the Ministry of Machinery Industry. 

5.It has the characteristics of high efficiency, low noise, flat performance curve and wide efficient area. 

6.Industrial boilers of 5 ~ 35 tons/hour can be used, those with similar intake conditions and suitable performance can be used, but the maximum temperature shall not more than250°C.

7.Before the induced draft fan, dust removal device with a dust removal efficiency of no less than 85% must be installed to reduce the dust content of the smoke entering the fan. 

8.It can not only reduce the pollution of the smoke on the environment, but also reduce the wear of the smoke on the fan, which is conducive to prolonging the life of the fan.

Specification

Series no.	9-11series	Feature selection
		Normal	anti-corrosion	wear-resisting		High temperature		anti-explosion	Remarks
Performance	Impeller diameter	400-3000mm
	Rotation speed	≤4000rpm
	Pressure range	364.8-8683Pa
	Flow range	2743-334898m³/h
Structure	Blade type	Forward
	Impeller support	SWSI(Single Width, Single Inlet), DWDI(Double Width, Double Inlet), Overhung type
	Lubrication method	Oil bath lubrication, grease lubrication, lubrication oil station							Can be specified
	Cooling method	Air cooling, Water cooling, Oil cooling							Can be specified
	Driven mode	Direct driven, Coupling driven, Belt driven							Can be specified
Gas composition	Gas temperature	Normal	Customer request	Customer request	≥250℃		Customer request
	gascharacteristic	Clean gas	Corrosive gas	Particulate dust	High temperature gas		Flammable gas, explosive gas
System configuration	Motor brand	Chinese famous brand, ABB, Siemens, WEG etc							Can be specified
	Impeller	High quality carbon steel	FRP, Stainless steel, Rubber Lining	Wear-resistant layer or wear-resistant liner, ceramic patch	High temperature high quality alloy steel		FRP, Aluminum alloy		Can be specified
	Air inlet cone	High quality carbon steel	FRP, Stainless steel, Rubber Lining	High quality carbon steel	High quality carbon steel		High quality carbon steel		Can be specified
	Casing	High quality carbon steel	FRP, Stainless steel, Rubber Lining	High quality carbon steel	High quality carbon steel		High quality carbon steel		Can be specified
	Air damper	High quality carbon steel	FRP, Stainless steel, Rubber Lining	High quality carbon steel	High quality carbon steel		High quality carbon steel		Can be specified
	Main shaft	High strength carbon steel, Alloy structural steel							Can be specified
	Bearing	ZWZ, SKF, FAG, NSK							Can be specified

The company deeply integrates cutting-edge scientific and technological strength, and closely cooperates with  

 Xian Jiaotong University and Beijing University of Aeronautics and Astronautics to develop a new generation of high-efficiency centrifugal fans. The fan is designed to fully consider the needs of various types of complex operating conditions, and effectively cope with wear-resistant, corrosion-resistant, high-temperature resistant and other special requirements, to ensure stable operation in a variety of harsh environments.

Product features

1.The fan can output higher gas pressure, and can provide more gas flow at the same time, low noise.

2. In the case of using the common base, the installation is very simple and basically does not require the support of professional technicians.

3. The motor shaft is elastically connected with the drive shaft. It is not necessary to tighten the belt or replace the belt frequently, and the maintenance workload is small.

4. The fan system running at normal temperature with an impeller diameter of less than 1400 mm does not require additional configuration of bearing cooling device, which reduces the user's investment and maintenance workload.

5. When the airflow resistance is increased, the motor load will be automatically reduced and the motor will not be burnt.

6.The fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.

7. Running test and vibration value detection after the production is completed, the fan operation is reliable.

Please and the business manager will give you a quote  

Certifications

Packing & Delivery

Company Profile

SIMO BLOWER

The company covers an area of 100 acres, has a variety of processing and testing equipment more than 300 sets, the annual production capacity of 10,000 sets. There are more than 300 employees, including more than 70 professional and technical personnel. It has a number of special laboratories including physical and chemical performance test, metallographic analysis test, non-destructive testing test, fan aerodynamic performance test and so on. 

In order to obtain more efficient and energy-saving operation effect, the company adheres to the business philosophy 

of "people-oriented, science and technology enterprise", and has maintained close cooperative relations with Xian Jiaotong University, Beijing University of Aeronautics and Astronautics, ShenYang Blower Research Institute and other major scientific research units over the years. 

The company has developed into a professional production enterprise with one-stop service of R & D, manufacturing, performance testing, installation and commissioning. The products are mainly centrifugal fans and axial fans, covering more than 30 series and more than 2,000 kinds of specifications, widely used in electric power, metallurgy, building materials, coal, petrochemical, industrial kiln and other fields.