380V/ODM/OEM Support Efficient Energy-Saving Wear Resistant Industrial Boiler Fd Fan

• Customization: Available
• Material: Stainless Steel
• Usage: for Manufacture, Cement Plant
• Model NO.: 5-06
• Flow Direction: Centrifugal
• Pressure: Medium Pressure
• Certification: ISO, CE
• Blade Material: High-Quality Carbon Structural Steel
• Selling Units: Single Item
• After-Sales Service Provided: Field Installation, Commissioning and Training
• Motor: Siemens Motor, Simo or by Your Demands
• Color: Depends on Your Request
• Place of Origin: Henan, China
• Customized Support: Odmoemobm
• Medium Temperature: 0~250c
• Bearing: Depend on Customer
• Mounting: Free Standing
• Warranty: 1year
• Transport Package: Standard Export Wooden Case
• Specification: 100*100*100cm
• Trademark: SIMO
• Origin: China
• HS Code: 4107960701
• Production Capacity: 10, 000 Sets/Year

Product Description

380V/ODM/OEM support efficient energy-saving wear resistant Industrial boiler FD fan

Product Description

The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace.
This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles.
It can be used for more than four years when the concentration of impurities is less than 200 mg/m3.
If it contains a lot of impurities, it also can be used, but it will shorten the service life.
The maximum operating temperature of the induced draft fan must not exceed 250°C.
The performance of the fan is expressed by parameters such as fan flow, full pressure, spindle speed, shaft power and efficiency.
 

Product Feature

1. Impeller:
2. 12 pieces of backward aerofoil blades are welded between the Arc cone front plate and the flat shaped rear plate. Because of the use of airfoil blades, the fan is guaranteed to have high efficiency, low noise and high strength. The impeller is corrected by static and dynamic balance, so the operation is stable. Forced draught fan and induced draught fan of the same machine number have same impeller structure.
    
3. Casing:
4. The casing is a volute welded by ordinary steel plates.
   The casing of a single suction fan is made in three different forms: The No. 8 to 12 casing is made into an integral structure and cannot be disassembled; The No. 14 to 16 casing is made into a two open structure; The No. 18~29.5 casing is made into a three open structure.
   The induced draft fan and the volute plate are appropriately thickened to prevent wear.
    
5. Inlet:
6. The converging and streamlined air inlet is made into a unitary structure and bolted to the inlet side of the fan.
    
7. Adjustment door:
8. A device for regulating the flow of the fan, axially mounted in front of the air inlet. The adjustment range is from 0° (full open) to 90°(fully closed).
    
9. Transmission parts:
10. The main shaft of the transmission part is made of high-quality steel, and the 5-51 series of fans are all made of roller bearings.

 

Product Parameters

Application	Temperature	Normal temperature Air
	Air composition	Clean air
		Dusty air
Performance	Impeller diameter	400~2500	mm
	Speed of mainshaft	1000-3550	rpm
	Pressure range	1567-5764	Pa
	Flow range	2470-377586	m3/h
Structure	Blade	Forward
	Impeller Support	SWSI (Single Width, Single Inlet), Impeller overhung.
	Drivetrain	Direct drivetrain	Can assign
System configuration	Motor	SIEMENS, ABB, SIMO, LA…	Can assign
	Impeller	Carbon steel
	Impeller cone (Air Inlet)	Carbon steel
	Case	Carbon steel
	Air damper	Carbon steel
	Foundation bolt
Optional components	System base frame, Protective screening, Silencer, Inlet & Outlet pipeline compensator, Inlet & Outlet flange,  Motor rain cover,  Special Electrical Motor,