| Customization: | Available |
|---|---|
| Material: | Stainless Steel |
| Usage: | for Manufacture, Cement Plant |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Factory direct selling carbon steel high temperature industrial centrifugal fan for cement plant
The 5-55 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines.
In the coal-fired boiler system, the ventilation and induce draft systems of various boilers with evaporation capacity of 20 tons/hour to 800 tons/hour can be configured.
1.It can output higher outlet pressure and provide more gas flow at the same time, low noise. Stable operation at higher media temperatures.
2. The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the highest efficiency point and reduce energy waste.
3. Motor slide guide can be provided for convenient belt tensioning to reduce energy loss caused by belt slack.
4. The bearing housing is reserved for the installation position of temperature and vibration sensors, which can facilitate the installation of fan operation monitoring device.
5. Use liquid lubricating oil. It is not necessary to open the bearing housing to replace and fill the lubricating oil. The bearing housing is provided with an observation window for easy observation of the quality and stock of the lubricating oil.
6. The bearing housing uses labyrinth mechanical seal, unique anti-leakage design inside, vent hole at the top, and sealing grease at the joint, completely eliminating the possibility of oil leakage in the bearing hosing.
7. After annealed treatment, the internal stress of the structure generated during welding can be completely eliminated to ensure that the impeller will not creepage and crack.
8. The impeller is subjected to a high standard of dynamic balancing adjusting to ensure stable operation of the fan.
9. After running test and vibration value detection, the operation is reliable.
|
Application |
Temperature |
Normal temperature Air |
|
|
Air composition |
Clean air |
||
|
Dusty air |
|||
|
Performance |
Impeller diameter |
400~2800 |
mm |
|
Speed of mainshaft |
1600-2900 |
rpm |
|
|
Pressure range |
1232~3867 |
Pa |
|
|
Flow range |
3007~44413 |
m3/h |
|
|
Structure |
Blade |
Forward |
|
|
Impeller Support |
SWSI (Single Width, Single Inlet), Impeller overhung. |
||
|
Drivetrain |
Direct drivetrain |
Can assign |
|
|
System |
Motor |
SIEMENS, ABB, SIMO, LA… |
Can assign |
|
Impeller |
Carbon steel |
||
|
Impeller cone (Air Inlet) |
Carbon steel |
||
|
Case |
Carbon steel |
||
|
Air damper |
Carbon steel |
||
|
Foundation bolt |
|||
|
Optional |
System base frame, Protective screening, |
||
){kind=link}